DIY Custom Tire Lettering
Is there anything more race car than white tire lettering? Years ago I drew in the letters of my Yokohama tires white paint pen, but found that it was tricky …
DIY Custom Tire Lettering Read MoreExterior
Flyin’ Miata 3D Printed Gas Cap Holder
I love clever little solutions like this, but there’s not much more to write for this post. The gas cap holder is printed to perfectly slot into the structure of …
Flyin’ Miata 3D Printed Gas Cap Holder Read More
Holley Retrobright LED Headlights
Upgrade from halogen headlights in Cibie housings to the LED 7″ Retrobright rounds from Holley with Morimoto LEDs. I chose the classic white (3,000k) option which has a nice incandescent …
Holley Retrobright LED Headlights Read More
Miata Fender Rolling
After some spirited driving on California State Rout 1 and US 101 on a road trip, I saw and heard that the front tires and fenders were rubbing. There are …
Miata Fender Rolling Read More
Car Make Corn’s Retro Mirrors v2
These super stylish retro style mirrors were on-sale at Rev9 and I had to scoop them up. They look the part exactly how I wanted; looking for reference photos I …
Car Make Corn’s Retro Mirrors v2 Read More
Flyin’ Miata NA/NB Dual Hood Lift Kit
This mod is mostly bling, but also gets the hood prop out of the way for working in the engine bay. Truthfully, I like to put the Miata’s hood up …
Flyin’ Miata NA/NB Dual Hood Lift Kit Read More
Back to OEM Washer Nozzles
After a few years with the fluidic washer nozzles, I decided to switch back to stock. The fluidic nozzles aim a little too high, I’ve heard they work better with …
Back to OEM Washer Nozzles Read More
How to Adjust Miata Trunk Torsion Springs
It is possible to adjust the torsion springs that hold the Miata trunk open. There are 3 strength settings depending on which slots the springs are in. Be careful not …
How to Adjust Miata Trunk Torsion Springs Read More
3D-Printed 14×7 RPF1 Center Caps
Enkei doesn’t make center caps for 14″ or 15″ RPF1 wheels. There are some options available for 15″ wheels (apparently Konig Helium center caps do the trick), and nice aftermarket …
3D-Printed 14×7 RPF1 Center Caps Read More
